Water pump paddle/wheel made of aluminum. These wheels are stronger and more efficient than the OEM water pump wheels.
Steun het YT kanaal
Met je aankoop
Gratis verzending
Voor alle bestellingen vanaf €99,-
Veilig betalen
Met iDeal, PayPal of Bancontact
Data sheet
Reference: 121850280
Brand: Piaggio
Crankshaft nut with movable washer , this nut fits the crankshaft (vario and flywheel) and clutch housing of a Gilera Runner 125cc and 180cc.
Reference: AVDM02
Brand: AVDM Tuning
The ultimate water pump kit for reliable performance - with or without an oil pump!
Reference: 04253-BLACK
Brand: HT Parts
Removing your electric starter? Seal it cleanly with this HT block-off plate. Keeps dirt out and saves weight. Includes 2 mounting bolts, available in five anodized colors.
Reference: 289554
Brand: Piaggio
Ring that sits behind the locking clip for your water pump / oil pump. Sits in many Piaggio 2-stroke engines such as Gilera Runner 50cc, 125cc and 180cc but also in a Piaggio Zip 2-stroke.
Reference: 72876
Brand: HT Parts
Drive sprocket that slides over crankshaft for Piaggio 125cc - 180cc driving oil pump and water pump.
Reference: TRND.030411.OPGEVOERD
Brand: WBTuning
For machines with a lot of HP, it is important to cool your transmission extra. More HP = also more heat. Mainly due to v-belt slippage but also the clutch and vario can get very hot! With this high performance air intake on your crankcase cap your engine block can suck in more air which improves the cooling of your engine block. My advice is to make...
Reference: TRND.030413-ZWART
Brand: Toronda
Cooling in your transmission is very important! This airscoop provides more air cooling in your crankcase. Better cooling = better performance! This airscoop is printed in special carbon filament which makes it extremely sturdy and it weighs almost nothing!
Reference: 04339-ALUMINIUM
Brand: HT Parts
Do you want to extend the life of your Piaggio or Gilera 125-180cc engine transmission? With the HT Airscoop you can easily replace your old oil hose passage with an extra air inlet. This ensures optimum cooling of your crankcase and prevents overheating of the v-belt and other transmission parts.
Reference: 829180
Brand: Toronda
Drive gear that slides over crankshaft for Piaggio 125cc - 180cc driving oil pump and water pump. This product (Piaggio OEM number: 829180) has not been available for a long time. Therefore Toronda put the drive sprocket for Piaggio 125cc - 180cc back into production!
Reference: B015956
Brand: Piaggio
Fresh builds also include fresh fitting bushings. The old ones are often rusted or have corrosion which causes them to stick or no longer fit properly in your crankcase. These fit both in your crankcase cover and between your 2 crankcase halves. Reference plug for Piaggio, Gilera & Vespa. Fits various models; Runner 125-180cc, GTS 300, Mojito, Liberty,...
Reference: 96928R
Brand: Piaggio
Original starter motor for various Piaggio and Gilera 125cc - 180cc engines. This starter motor is o.a. on the Gilera Runner 180cc 2 Stroke and Skipper 125cc. This starter motor is made by Piaggio (OEM)
Reference: 414838
Brand: Piaggio
Original Piaggio flange bolt for o.a. the crankcase cover of many Piaggio & Gilera 125cc 180cc engine blocks. Dimension M6 x 35 mm
Reference: TRND.030411.WB
Brand: WBTuning
For machines with a lot of HP, it is important to cool your transmission extra. More HP = also more heat. Mainly due to v-belt slippage but also the clutch and vario can get very hot! With this high performance air intake on your crankcase cap your engine block can suck in more air which improves the cooling of your engine block. My advice is to make...
Reference: 246390110
Brand: RMS
Original starter motor for various Piaggio and Gilera 125cc - 180cc engines. This starter motor is o.a. on the Gilera Runner 180cc 2 Stroke and Skipper 125cc. This starter motor is made by RMS (A-quality).
Reference: B017632
Brand: Piaggio
Original Piaggio flange bolt for o.a. the crankcase cover of many Piaggio & Gilera 125cc 180cc engine blocks. Dimension M6 x 45 mm
Reference: WBT-00050
Brand: WBTuning
Stop rubber for center stand fitting Piaggio 125 - 180cc. Original ones are no longer supplied. I therefore make them myself from a high quality PTE rubber (3D printed). Piaggio Article number: 273884
Water pump paddle/wheel made of aluminum. These wheels are stronger and more efficient than the OEM water pump wheels.
