- Tijdelijk niet leverbaar
The ultimate water pump kit for reliable performance - with or without an oil pump!
Met je aankoop
Voor alle bestellingen vanaf €99,-
Met iDeal, PayPal of Bancontact
The ultimate water pump kit for reliable performance - with or without an oil pump!
The AVDM TUNING Water Pump Set has been specially upgraded for tuners who are done with the known problems of standard oil pump delete kits. No more screeching noises, no more loose pinions or wear and tear on your water pump shaft - just performance you can build on.
Whether you want to run with or without an oil pump, this kit gives you all the flexibility you need without having to open up your engine to make a change. Simply change the pinion and you're good to go!
✅ No more gear noise
✅ Prevents wear and metal particles in your block
✅ Top quality components - built for durability
✅ Ready for tuning - with minimal friction and maximum reliability
✅ Freedom of choice: can be used with or without an oil pump
1x Tempered water pump shaft made of high-quality alloy (low friction aftertreatment)
2x Closed steel bearings with low rolling resistance
2x Locking clips
1x Spacer bushing
1x OEM retaining ring
1x OEM Piaggio water pump vane
In short: the perfect solution for anyone who takes their setup seriously.
AVDM delivers reliability, performance and choice in one complete kit.
An absolute must-have for any serious scooter enthusiast!
Reference: 829180
Brand: Toronda
Drive gear that slides over crankshaft for Piaggio 125cc - 180cc driving oil pump and water pump. This product (Piaggio OEM number: 829180) has not been available for a long time. Therefore Toronda put the drive sprocket for Piaggio 125cc - 180cc back into production!
Reference: 72876
Brand: HT Parts
Drive sprocket that slides over crankshaft for Piaggio 125cc - 180cc driving oil pump and water pump.
Reference: 286162
Brand: Piaggio
Are you looking for a new V-belt for the oil pump of your Piaggio 50cc scooter? With us you will find the original Piaggio V-belt with article number 286162. Order easily online and receive it quickly at home.
Reference: 04253-BLACK
Brand: HT Parts
Removing your electric starter? Seal it cleanly with this HT block-off plate. Keeps dirt out and saves weight. Includes 2 mounting bolts, available in five anodized colors.
Reference: 03578
Brand: HT Parts
Water pump paddle/wheel made of aluminum. These wheels are stronger and more efficient than the OEM water pump wheels.
Reference: BGM7737
Brand: BGM
These rubbers are considerably tighter than the original rubbers, making them last longer and provide better stability.
Reference: WBT-00050
Brand: WBTuning
Stop rubber for center stand fitting Piaggio 125 - 180cc. Original ones are no longer supplied. I therefore make them myself from a high quality PTE rubber (3D printed). Piaggio Article number: 273884
Reference: BGM7940
Brand: BGM
Since PIAGGIO stopped production of this silent block some time ago and thus could no longer supply it, we fixed the problem and produced a replacement.
Reference: WB-04309
Brand: WBTuning
Electric start cover plate to seal your starter motor in a neat way to prevent dirt from getting into your block. On tuned scooters you often want to remove your electric start. Especially if you ride with custom starter cranks and it also saves weight.
Reference: TRND.030411.OPGEVOERD
Brand: WBTuning
For machines with a lot of HP, it is important to cool your transmission extra. More HP = also more heat. Mainly due to v-belt slippage but also the clutch and vario can get very hot! With this high performance air intake on your crankcase cap your engine block can suck in more air which improves the cooling of your engine block. My advice is to make...
Reference: 414838
Brand: Piaggio
Original Piaggio flange bolt for o.a. the crankcase cover of many Piaggio & Gilera 125cc 180cc engine blocks. Dimension M6 x 35 mm
Reference: 829180
Brand: Toronda
Drive gear that slides over crankshaft for Piaggio 125cc - 180cc driving oil pump and water pump. This product (Piaggio OEM number: 829180) has not been available for a long time. Therefore Toronda put the drive sprocket for Piaggio 125cc - 180cc back into production!
Reference: TRND.030411ZWART
Brand: Toronda
For machines with a lot of HP, it is important to cool your transmission extra. More HP = also more heat. Mainly due to v-belt slippage but also the clutch and vario can get very hot! With this high performance air intake on your crankcase cap your engine block can suck in more air which improves the cooling of your engine block. My advice is to make...
Reference: 96928R
Brand: Piaggio
Original starter motor for various Piaggio and Gilera 125cc - 180cc engines. This starter motor is o.a. on the Gilera Runner 180cc 2 Stroke and Skipper 125cc. This starter motor is made by Piaggio (OEM)
Reference: 289553
Brand: Piaggio
Locking spring / locking clip to secure your water pump / oil pump shaft in your crankcase. Located in many Piaggio 2-stroke engines such as Gilera Runner 50cc, 125cc and 180cc but also in a Piaggio Zip 2-stroke.
Reference: B017632
Brand: Piaggio
Original Piaggio flange bolt for o.a. the crankcase cover of many Piaggio & Gilera 125cc 180cc engine blocks. Dimension M6 x 45 mm
Reference: CNC02
Brand: WBTuning
Electric start cover plate to seal your starter motor in a neat way to prevent dirt from getting into your block. On tuned scooters you often want to remove your electric start. Especially if you ride with custom starter cranks and it also saves weight.
Reference: TRND.030413-ZWART
Brand: Toronda
Cooling in your transmission is very important! This airscoop provides more air cooling in your crankcase. Better cooling = better performance! This airscoop is printed in special carbon filament which makes it extremely sturdy and it weighs almost nothing!
Reference: 04293-ALU
Brand: HT Parts
Upgrade your scooter with this stylish HT CNC oil pump inspection cover. Made from precision CNC-machined aluminum and available in five colors. Comes with two O-rings for easy installation.
The ultimate water pump kit for reliable performance - with or without an oil pump!