Original starter motor for various Piaggio and Gilera 125cc - 180cc engines. This starter motor is o.a. on the Gilera Runner 180cc 2 Stroke and Skipper 125cc. This starter motor is made by Piaggio (OEM)
Steun het YT kanaal
Met je aankoop
Gratis verzending
Voor alle bestellingen vanaf €99,-
Veilig betalen
Met iDeal, PayPal of Bancontact
This part fits the following motor scooters:
Reference: B017632
Brand: Piaggio
Original Piaggio flange bolt for o.a. the crankcase cover of many Piaggio & Gilera 125cc 180cc engine blocks. Dimension M6 x 45 mm
Reference: CNC03
Brand: WBTuning
If you remove the oil pump, of course you'll also want the oil hose grommet for a sealed plate. Besides keeping moisture and dirt out it looks cool! Do you still want to drive with hoses? That is possible! There are 2 dummy holes in it that you can drill.
Reference: 03578
Brand: HT Parts
Water pump paddle/wheel made of aluminum. These wheels are stronger and more efficient than the OEM water pump wheels.
Reference: BGM7940
Brand: BGM
Since PIAGGIO stopped production of this silent block some time ago and thus could no longer supply it, we fixed the problem and produced a replacement.
Reference: 72876
Brand: HT Parts
Drive sprocket that slides over crankshaft for Piaggio 125cc - 180cc driving oil pump and water pump.
Reference: TRND.030423
Brand: Toronda
Cover for the Toronda bracket wheel nut, fits the Gilera Runner 180 DD rear wheel only. Provides a sleek finish and prevents dirt and water from entering the rim. Very nice matte black finish, 3D printed with very strong carbon fiber reinforced polymer. This cover comes with the brace now, but fits all our previously sold braces (Gilera Runner 125/180 DD...
Reference: TRND.030411ZWART
Brand: Toronda
For machines with a lot of HP, it is important to cool your transmission extra. More HP = also more heat. Mainly due to v-belt slippage but also the clutch and vario can get very hot! With this high performance air intake on your crankcase cap your engine block can suck in more air which improves the cooling of your engine block. My advice is to make...
Reference: WB-04293
Brand: WBTuning
Replace your old rubber with this beautiful CNC milled oil pump inspection plate. Supplied with 2 o-rings.
Reference: 03611
Brand: HT Parts
This special nut allows you to mount a double-barreled kickstart cover (crankcase cover) on a single-barreled block. This is a so-called ''rolling nut conversion'' for the Piaggio engines.
Reference: 04339-ALUMINIUM
Brand: HT Parts
Do you want to extend the life of your Piaggio or Gilera 125-180cc engine transmission? With the HT Airscoop you can easily replace your old oil hose passage with an extra air inlet. This ensures optimum cooling of your crankcase and prevents overheating of the v-belt and other transmission parts.
Reference: 289554
Brand: Piaggio
Ring that sits behind the locking clip for your water pump / oil pump. Sits in many Piaggio 2-stroke engines such as Gilera Runner 50cc, 125cc and 180cc but also in a Piaggio Zip 2-stroke.
Reference: 1016171
Brand: MALOSSI
Red Malossi oil dipstick for Piaggio & Gilera 2-stroke engines and scooters.
Reference: 289553
Brand: Piaggio
Locking spring / locking clip to secure your water pump / oil pump shaft in your crankcase. Located in many Piaggio 2-stroke engines such as Gilera Runner 50cc, 125cc and 180cc but also in a Piaggio Zip 2-stroke.
Reference: AVDM02
Brand: AVDM Tuning
The ultimate water pump kit for reliable performance - with or without an oil pump!
Reference: 04292
Brand: HT Parts
Replace your oil hose grommet with this sealed HT plate. Keeps out dirt and moisture while adding a clean look. Still want to run hoses? Pre-drilled dummy holes allow it!
Reference: 121850280
Brand: Piaggio
Crankshaft nut with movable washer , this nut fits the crankshaft (vario and flywheel) and clutch housing of a Gilera Runner 125cc and 180cc.
Original starter motor for various Piaggio and Gilera 125cc - 180cc engines. This starter motor is o.a. on the Gilera Runner 180cc 2 Stroke and Skipper 125cc. This starter motor is made by Piaggio (OEM)
