If you remove the oil pump, of course you'll also want the oil hose grommet for a sealed plate. Besides keeping moisture and dirt out it looks cool! Do you still want to drive with hoses? That is possible! There are 2 dummy holes in it that you can drill.
Steun het YT kanaal
Met je aankoop
Gratis verzending
Voor alle bestellingen vanaf €99,-
Veilig betalen
Met iDeal, PayPal of Bancontact
Data sheet
Reference: 121850280
Brand: Piaggio
Crankshaft nut with movable washer , this nut fits the crankshaft (vario and flywheel) and clutch housing of a Gilera Runner 125cc and 180cc.
Reference: 04253-BLACK
Brand: HT Parts
Removing your electric starter? Seal it cleanly with this HT block-off plate. Keeps dirt out and saves weight. Includes 2 mounting bolts, available in five anodized colors.
Reference: TRND.030411ZWART
Brand: Toronda
For machines with a lot of HP, it is important to cool your transmission extra. More HP = also more heat. Mainly due to v-belt slippage but also the clutch and vario can get very hot! With this high performance air intake on your crankcase cap your engine block can suck in more air which improves the cooling of your engine block. My advice is to make...
Reference: B015956
Brand: Piaggio
Fresh builds also include fresh fitting bushings. The old ones are often rusted or have corrosion which causes them to stick or no longer fit properly in your crankcase. These fit both in your crankcase cover and between your 2 crankcase halves. Reference plug for Piaggio, Gilera & Vespa. Fits various models; Runner 125-180cc, GTS 300, Mojito, Liberty,...
Reference: WB-04293
Brand: WBTuning
Replace your old rubber with this beautiful CNC milled oil pump inspection plate. Supplied with 2 o-rings.
Reference: 04339-ALUMINIUM
Brand: HT Parts
Do you want to extend the life of your Piaggio or Gilera 125-180cc engine transmission? With the HT Airscoop you can easily replace your old oil hose passage with an extra air inlet. This ensures optimum cooling of your crankcase and prevents overheating of the v-belt and other transmission parts.
Reference: TRND.030413-ZWART
Brand: Toronda
Cooling in your transmission is very important! This airscoop provides more air cooling in your crankcase. Better cooling = better performance! This airscoop is printed in special carbon filament which makes it extremely sturdy and it weighs almost nothing!
Reference: AVDM02
Brand: AVDM Tuning
The ultimate water pump kit for reliable performance - with or without an oil pump!
Reference: 04292
Brand: HT Parts
Replace your oil hose grommet with this sealed HT plate. Keeps out dirt and moisture while adding a clean look. Still want to run hoses? Pre-drilled dummy holes allow it!
Reference: 246390110
Brand: RMS
Original starter motor for various Piaggio and Gilera 125cc - 180cc engines. This starter motor is o.a. on the Gilera Runner 180cc 2 Stroke and Skipper 125cc. This starter motor is made by RMS (A-quality).
Reference: 03611
Brand: HT Parts
This special nut allows you to mount a double-barreled kickstart cover (crankcase cover) on a single-barreled block. This is a so-called ''rolling nut conversion'' for the Piaggio engines.
Reference: BGM7940
Brand: BGM
Since PIAGGIO stopped production of this silent block some time ago and thus could no longer supply it, we fixed the problem and produced a replacement.
Reference: 03578
Brand: HT Parts
Water pump paddle/wheel made of aluminum. These wheels are stronger and more efficient than the OEM water pump wheels.
Reference: 414838
Brand: Piaggio
Original Piaggio flange bolt for o.a. the crankcase cover of many Piaggio & Gilera 125cc 180cc engine blocks. Dimension M6 x 35 mm
Reference: 1016171
Brand: MALOSSI
Red Malossi oil dipstick for Piaggio & Gilera 2-stroke engines and scooters.
Reference: BGM7737
Brand: BGM
These rubbers are considerably tighter than the original rubbers, making them last longer and provide better stability.
If you remove the oil pump, of course you'll also want the oil hose grommet for a sealed plate. Besides keeping moisture and dirt out it looks cool! Do you still want to drive with hoses? That is possible! There are 2 dummy holes in it that you can drill.
