Drive gear that slides over crankshaft for Piaggio 125cc - 180cc driving oil pump and water pump. This product (Piaggio OEM number: 829180) has not been available for a long time. Therefore Toronda put the drive sprocket for Piaggio 125cc - 180cc back into production!
Steun het YT kanaal
Met je aankoop
Gratis verzending
Voor alle bestellingen vanaf €99,-
Veilig betalen
Met iDeal, PayPal of Bancontact
This sprocket is better than original! Is made of high quality steel and put in a black oxide coating for extra strength and durability. Also, the sprocket is blind inside. This sprocket has been tested on BGM, Jasil and Stage 6 crankshafts (both 52 and 55 stroke). Throw away your old worn out sprocket and replace it with this one in high quality! (Photo may be slightly different! Will be updated asap!)
Data sheet
Reference: 121850280
Brand: Piaggio
Crankshaft nut with movable washer , this nut fits the crankshaft (vario and flywheel) and clutch housing of a Gilera Runner 125cc and 180cc.
Reference: 04293-ALU
Brand: HT Parts
Upgrade your scooter with this stylish HT CNC oil pump inspection cover. Made from precision CNC-machined aluminum and available in five colors. Comes with two O-rings for easy installation.
Reference: B015956
Brand: Piaggio
Fresh builds also include fresh fitting bushings. The old ones are often rusted or have corrosion which causes them to stick or no longer fit properly in your crankcase. These fit both in your crankcase cover and between your 2 crankcase halves. Reference plug for Piaggio, Gilera & Vespa. Fits various models; Runner 125-180cc, GTS 300, Mojito, Liberty,...
Reference: BGM7940
Brand: BGM
Since PIAGGIO stopped production of this silent block some time ago and thus could no longer supply it, we fixed the problem and produced a replacement.
Reference: 72876
Brand: HT Parts
Drive sprocket that slides over crankshaft for Piaggio 125cc - 180cc driving oil pump and water pump.
Reference: 246390110
Brand: RMS
Original starter motor for various Piaggio and Gilera 125cc - 180cc engines. This starter motor is o.a. on the Gilera Runner 180cc 2 Stroke and Skipper 125cc. This starter motor is made by RMS (A-quality).
Reference: TRND.030411ZWART
Brand: Toronda
For machines with a lot of HP, it is important to cool your transmission extra. More HP = also more heat. Mainly due to v-belt slippage but also the clutch and vario can get very hot! With this high performance air intake on your crankcase cap your engine block can suck in more air which improves the cooling of your engine block. My advice is to make...
Reference: 03611
Brand: HT Parts
This special nut allows you to mount a double-barreled kickstart cover (crankcase cover) on a single-barreled block. This is a so-called ''rolling nut conversion'' for the Piaggio engines.
Reference: BGM7737
Brand: BGM
These rubbers are considerably tighter than the original rubbers, making them last longer and provide better stability.
Reference: TRND.030423
Brand: Toronda
Cover for the Toronda bracket wheel nut, fits the Gilera Runner 180 DD rear wheel only. Provides a sleek finish and prevents dirt and water from entering the rim. Very nice matte black finish, 3D printed with very strong carbon fiber reinforced polymer. This cover comes with the brace now, but fits all our previously sold braces (Gilera Runner 125/180 DD...
Reference: 96928R
Brand: Piaggio
Original starter motor for various Piaggio and Gilera 125cc - 180cc engines. This starter motor is o.a. on the Gilera Runner 180cc 2 Stroke and Skipper 125cc. This starter motor is made by Piaggio (OEM)
Reference: 04253-BLACK
Brand: HT Parts
Removing your electric starter? Seal it cleanly with this HT block-off plate. Keeps dirt out and saves weight. Includes 2 mounting bolts, available in five anodized colors.
Reference: B017632
Brand: Piaggio
Original Piaggio flange bolt for o.a. the crankcase cover of many Piaggio & Gilera 125cc 180cc engine blocks. Dimension M6 x 45 mm
Reference: 1016171
Brand: MALOSSI
Red Malossi oil dipstick for Piaggio & Gilera 2-stroke engines and scooters.
Reference: TRND.030411.OPGEVOERD
Brand: WBTuning
For machines with a lot of HP, it is important to cool your transmission extra. More HP = also more heat. Mainly due to v-belt slippage but also the clutch and vario can get very hot! With this high performance air intake on your crankcase cap your engine block can suck in more air which improves the cooling of your engine block. My advice is to make...
Reference: 04292
Brand: HT Parts
Replace your oil hose grommet with this sealed HT plate. Keeps out dirt and moisture while adding a clean look. Still want to run hoses? Pre-drilled dummy holes allow it!
Drive gear that slides over crankshaft for Piaggio 125cc - 180cc driving oil pump and water pump. This product (Piaggio OEM number: 829180) has not been available for a long time. Therefore Toronda put the drive sprocket for Piaggio 125cc - 180cc back into production!
