Cooling in your transmission is very important! This airscoop provides more air cooling in your crankcase. Better cooling = better performance! This airscoop is printed in special carbon filament which makes it extremely sturdy and it weighs almost nothing!
Steun het YT kanaal
Met je aankoop
Gratis verzending
Voor alle bestellingen vanaf €99,-
Veilig betalen
Met iDeal, PayPal of Bancontact
Data sheet
Specific References
Reference: BGM7940
Brand: BGM
Since PIAGGIO stopped production of this silent block some time ago and thus could no longer supply it, we fixed the problem and produced a replacement.
Reference: 246390110
Brand: RMS
Original starter motor for various Piaggio and Gilera 125cc - 180cc engines. This starter motor is o.a. on the Gilera Runner 180cc 2 Stroke and Skipper 125cc. This starter motor is made by RMS (A-quality).
Reference: 04292
Brand: HT Parts
Replace your oil hose grommet with this sealed HT plate. Keeps out dirt and moisture while adding a clean look. Still want to run hoses? Pre-drilled dummy holes allow it!
Reference: AVDM02
Brand: AVDM Tuning
The ultimate water pump kit for reliable performance - with or without an oil pump!
Reference: TRND.030423
Brand: Toronda
Cover for the Toronda bracket wheel nut, fits the Gilera Runner 180 DD rear wheel only. Provides a sleek finish and prevents dirt and water from entering the rim. Very nice matte black finish, 3D printed with very strong carbon fiber reinforced polymer. This cover comes with the brace now, but fits all our previously sold braces (Gilera Runner 125/180 DD...
Reference: BGM7737
Brand: BGM
These rubbers are considerably tighter than the original rubbers, making them last longer and provide better stability.
Reference: B017632
Brand: Piaggio
Original Piaggio flange bolt for o.a. the crankcase cover of many Piaggio & Gilera 125cc 180cc engine blocks. Dimension M6 x 45 mm
Reference: 04339-ALUMINIUM
Brand: HT Parts
Do you want to extend the life of your Piaggio or Gilera 125-180cc engine transmission? With the HT Airscoop you can easily replace your old oil hose passage with an extra air inlet. This ensures optimum cooling of your crankcase and prevents overheating of the v-belt and other transmission parts.
Reference: 121850280
Brand: Piaggio
Crankshaft nut with movable washer , this nut fits the crankshaft (vario and flywheel) and clutch housing of a Gilera Runner 125cc and 180cc.
Reference: CNC03
Brand: WBTuning
If you remove the oil pump, of course you'll also want the oil hose grommet for a sealed plate. Besides keeping moisture and dirt out it looks cool! Do you still want to drive with hoses? That is possible! There are 2 dummy holes in it that you can drill.
Reference: CNC02
Brand: WBTuning
Electric start cover plate to seal your starter motor in a neat way to prevent dirt from getting into your block. On tuned scooters you often want to remove your electric start. Especially if you ride with custom starter cranks and it also saves weight.
Reference: 414838
Brand: Piaggio
Original Piaggio flange bolt for o.a. the crankcase cover of many Piaggio & Gilera 125cc 180cc engine blocks. Dimension M6 x 35 mm
Reference: TRND.030411.WB
Brand: WBTuning
For machines with a lot of HP, it is important to cool your transmission extra. More HP = also more heat. Mainly due to v-belt slippage but also the clutch and vario can get very hot! With this high performance air intake on your crankcase cap your engine block can suck in more air which improves the cooling of your engine block. My advice is to make...
Reference: 289553
Brand: Piaggio
Locking spring / locking clip to secure your water pump / oil pump shaft in your crankcase. Located in many Piaggio 2-stroke engines such as Gilera Runner 50cc, 125cc and 180cc but also in a Piaggio Zip 2-stroke.
Reference: 04253-BLACK
Brand: HT Parts
Removing your electric starter? Seal it cleanly with this HT block-off plate. Keeps dirt out and saves weight. Includes 2 mounting bolts, available in five anodized colors.
Reference: 04293-ALU
Brand: HT Parts
Upgrade your scooter with this stylish HT CNC oil pump inspection cover. Made from precision CNC-machined aluminum and available in five colors. Comes with two O-rings for easy installation.
Cooling in your transmission is very important! This airscoop provides more air cooling in your crankcase. Better cooling = better performance! This airscoop is printed in special carbon filament which makes it extremely sturdy and it weighs almost nothing!
