Original starter motor for various Piaggio and Gilera 125cc - 180cc engines. This starter motor is o.a. on the Gilera Runner 180cc 2 Stroke and Skipper 125cc. This starter motor is made by Piaggio (OEM)
Steun het YT kanaal
Met je aankoop
Gratis verzending
Voor alle bestellingen vanaf €99,-
Veilig betalen
Met iDeal, PayPal of Bancontact
This part fits the following motor scooters:
Reference: 158214610
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: WB-04309
Brand: WBTuning
Electric start cover plate to seal your starter motor in a neat way to prevent dirt from getting into your block. On tuned scooters you often want to remove your electric start. Especially if you ride with custom starter cranks and it also saves weight.
Reference: 158214620
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: CNC03
Brand: WBTuning
If you remove the oil pump, of course you'll also want the oil hose grommet for a sealed plate. Besides keeping moisture and dirt out it looks cool! Do you still want to drive with hoses? That is possible! There are 2 dummy holes in it that you can drill.
Reference: 246390110
Brand: RMS
Original starter motor for various Piaggio and Gilera 125cc - 180cc engines. This starter motor is o.a. on the Gilera Runner 180cc 2 Stroke and Skipper 125cc. This starter motor is made by RMS (A-quality).
Reference: TRND.030411
Brand: Toronda
For machines with a lot of HP, it is important to cool your transmission extra. More HP = also more heat. Mainly due to v-belt slippage but also the clutch and vario can get very hot! With this high performance air intake on your crankcase cap your engine block can suck in more air which improves the cooling of your engine block. My advice is to make...
Reference: 158214690
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: 158214625
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: BGM7940
Brand: BGM
Since PIAGGIO stopped production of this silent block some time ago and thus could no longer supply it, we fixed the problem and produced a replacement.
Reference: 414838
Brand: Piaggio
Original Piaggio flange bolt for o.a. the crankcase cover of many Piaggio & Gilera 125cc 180cc engine blocks. Dimension M6 x 35 mm
Reference: 1016171
Brand: MALOSSI
Red Malossi oil dipstick for Piaggio & Gilera 2-stroke engines and scooters.
Reference: 158214670
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: 829180
Brand: Toronda
Drive gear that slides over crankshaft for Piaggio 125cc - 180cc driving oil pump and water pump. This product (Piaggio OEM number: 829180) has not been available for a long time. Therefore Toronda put the drive sprocket for Piaggio 125cc - 180cc back into production!
Reference: AVDM02
Brand: AVDM Tuning
The ultimate water pump kit for reliable performance - with or without an oil pump!
Reference: 158214640
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: TRND.030413BL
Brand: Toronda
Cooling in your transmission is very important! This airscoop provides more air cooling in your crankcase. Better cooling = better performance! This airscoop is printed in special carbon filament which makes it extremely sturdy and it weighs almost nothing!
Original starter motor for various Piaggio and Gilera 125cc - 180cc engines. This starter motor is o.a. on the Gilera Runner 180cc 2 Stroke and Skipper 125cc. This starter motor is made by Piaggio (OEM)
