Steun het YT kanaal
Met je aankoop
Gratis verzending
Voor alle bestellingen vanaf €99,-
Veilig betalen
Met iDeal, PayPal of Bancontact
Data sheet
Reference: 158214655
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: 03578
Brand: HT Parts
Water pump paddle/wheel made of aluminum. These wheels are stronger and more efficient than the OEM water pump wheels.
Reference: 158214630
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: 829180
Brand: HT Parts
Drive sprocket that slides over crankshaft for Piaggio 125cc - 180cc driving oil pump and water pump.
Reference: 158214616
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: 158214310
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: 289554
Brand: Piaggio
Ring that sits behind the locking clip for your water pump / oil pump. Sits in many Piaggio 2-stroke engines such as Gilera Runner 50cc, 125cc and 180cc but also in a Piaggio Zip 2-stroke.
Reference: 158214645
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: 158214625
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: CNC03
Brand: WBTuning
If you remove the oil pump, of course you'll also want the oil hose grommet for a sealed plate. Besides keeping moisture and dirt out it looks cool! Do you still want to drive with hoses? That is possible! There are 2 dummy holes in it that you can drill.
Reference: 158214690
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: B015956
Brand: Piaggio
Fresh builds also include fresh fitting bushings. The old ones are often rusted or have corrosion which causes them to stick or no longer fit properly in your crankcase. These fit both in your crankcase cover and between your 2 crankcase halves. Reference plug for Piaggio, Gilera & Vespa. Fits various models; Runner 125-180cc, GTS 300, Mojito, Liberty,...
Reference: 04339
Brand: HT Parts
Do you want to extend the life of your Piaggio or Gilera 125-180cc engine transmission? With the HT Airscoop you can easily replace your old oil hose passage with an extra air inlet. This ensures optimum cooling of your crankcase and prevents overheating of the v-belt and other transmission parts.
Reference: AVDM02
Brand: AVDM Tuning
The ultimate water pump kit for reliable performance - with or without an oil pump!
Reference: 03611
Brand: HT Parts
This special nut allows you to mount a double-barreled kickstart cover (crankcase cover) on a single-barreled block. This is a so-called ''rolling nut conversion'' for the Piaggio engines.
Reference: 3810006
Brand: Piaggio
Seal for the rear wheel bearing. Size: 22x47x7mm. Fits all Piaggio & Gilera 125cc to 180cc engine blocks. Made by Corteco from high quality VITON rubber.
