- New
- Tijdelijk niet leverbaar
 
	        
     
	         
           
           
          The ultimate water pump kit for reliable performance - with or without an oil pump!
Met je aankoop
Voor alle bestellingen vanaf €99,-
Met iDeal, PayPal of Bancontact
The ultimate water pump kit for reliable performance - with or without an oil pump!
The AVDM TUNING Water Pump Set has been specially upgraded for tuners who are done with the known problems of standard oil pump delete kits. No more screeching noises, no more loose pinions or wear and tear on your water pump shaft - just performance you can build on.
Whether you want to run with or without an oil pump, this kit gives you all the flexibility you need without having to open up your engine to make a change. Simply change the pinion and you're good to go!
✅ No more gear noise
✅ Prevents wear and metal particles in your block
✅ Top quality components - built for durability
✅ Ready for tuning - with minimal friction and maximum reliability
✅ Freedom of choice: can be used with or without an oil pump
1x Tempered water pump shaft made of high-quality alloy (low friction aftertreatment)
2x Closed steel bearings with low rolling resistance
2x Locking clips
1x Spacer bushing
1x OEM retaining ring
1x OEM Piaggio water pump vane
In short: the perfect solution for anyone who takes their setup seriously.
AVDM delivers reliability, performance and choice in one complete kit.
An absolute must-have for any serious scooter enthusiast!
Reference: 829180
Brand: Toronda
Drive gear that slides over crankshaft for Piaggio 125cc - 180cc driving oil pump and water pump. This product (Piaggio OEM number: 829180) has not been available for a long time. Therefore Toronda put the drive sprocket for Piaggio 125cc - 180cc back into production!
Reference: 829180
Brand: HT Parts
Drive sprocket that slides over crankshaft for Piaggio 125cc - 180cc driving oil pump and water pump.
Reference: 286162
Brand: Piaggio
Are you looking for a new V-belt for the oil pump of your Piaggio 50cc scooter? With us you will find the original Piaggio V-belt with article number 286162. Order easily online and receive it quickly at home.
Reference: CNC02
Brand: WBTuning
Electric start cover plate to seal your starter motor in a neat way to prevent dirt from getting into your block. On tuned scooters you often want to remove your electric start. Especially if you ride with custom starter cranks and it also saves weight.
Reference: 1016171
Brand: MALOSSI
Red Malossi oil dipstick for Piaggio & Gilera 2-stroke engines and scooters.
Reference: B015956
Brand: Piaggio
Fresh builds also include fresh fitting bushings. The old ones are often rusted or have corrosion which causes them to stick or no longer fit properly in your crankcase. These fit both in your crankcase cover and between your 2 crankcase halves. Reference plug for Piaggio, Gilera & Vespa. Fits various models; Runner 125-180cc, GTS 300, Mojito, Liberty,...
Reference: 158214620
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: 158214670
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: WBT-00050
Brand: WBTuning
Stop rubber for center stand fitting Piaggio 125 - 180cc. Original ones are no longer supplied. I therefore make them myself from a high quality PTE rubber (3D printed). Piaggio Article number: 273884
Reference: 158214645
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: 158214310
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
Reference: 04292
Brand: HT Parts
Replace your oil hose grommet with this sealed HT plate. Keeps out dirt and moisture while adding a clean look. Still want to run hoses? Pre-drilled dummy holes allow it!
Reference: 04293
Brand: HT Parts
Upgrade your scooter with this stylish HT CNC oil pump inspection cover. Made from precision CNC-machined aluminum and available in five colors. Comes with two O-rings for easy installation.
Reference: 3810006
Brand: Piaggio
Seal for the rear wheel bearing. Size: 22x47x7mm. Fits all Piaggio & Gilera 125cc to 180cc engine blocks. Made by Corteco from high quality VITON rubber.
Reference: 03578
Brand: HT Parts
Water pump paddle/wheel made of aluminum. These wheels are stronger and more efficient than the OEM water pump wheels.
Reference: BGM7737
Brand: BGM
These rubbers are considerably tighter than the original rubbers, making them last longer and provide better stability.
Reference: 414838
Brand: Piaggio
Original Piaggio flange bolt for o.a. the crankcase cover of many Piaggio & Gilera 125cc 180cc engine blocks. Dimension M6 x 35 mm
Reference: TRND.030411
Brand: Toronda
For machines with a lot of HP, it is important to cool your transmission extra. More HP = also more heat. Mainly due to v-belt slippage but also the clutch and vario can get very hot! With this high performance air intake on your crankcase cap your engine block can suck in more air which improves the cooling of your engine block. My advice is to make...
Reference: 158214630
Brand: WBTuning
Material: Galvanized steel / Size: M6 / Type: Allen Bolt
 
		            The ultimate water pump kit for reliable performance - with or without an oil pump!