There are 250 products.
Reference: 1A003109
Brand: Piaggio
Phillips Screw Original Piaggio. This screw goes through your ignition and base plate into the crankcase. See photo 2, number 12.
Reference: 015585
Brand: Piaggio
Phillips Screw Original Piaggio. This screw is used to mount the oil pump to the fixing plate on the right side. See photo 2, number 10.
Reference: 015856
Brand: Piaggio
Phillips Screw Original Piaggio. This screw goes through the oil pump and fixing plate into the engine casing. See photo 2, number 18.
Reference: 1A003111
Brand: Piaggio
Phillips Screw Original Piaggio. This screw is mounted to the left of the oil pump fixing plate. See photo 2, number 8.
Reference: 431089
Brand: Piaggio
Does your Gilera or Piaggio 125cc - 180cc scooter suffer from a slipping v-belt? Then chances are that your rear pulley retaining ring (or o-ring) is worn out and grease is leaking out of your rear pulley. This high-quality seal will ensure optimal operation of your rear pulleys and prevent grease leakage. Order today and enjoy trouble-free riding again.
Reference: 4352035
Brand: Piaggio
Original Piaggio retaining ring 8x16x10/11mm for the water pump of Piaggio & Gilera 50cc - 180cc scooters. Original quality, perfect fit.
Reference: 127927
Brand: Piaggio
The Original Seal Banjo Bolt Brake Caliper 127927 for Piaggio & Gilera Runner scooters is an essential part for optimal operation of the brake system. This seal ensures a leak-free connection between the banjo bolt and the caliper, which is crucial for safe and smooth braking.
Reference: 82878R
Brand: Piaggio
Gear cover Runner 125cc 180cc double bearing. Seal is mounted in the gear cover (also called reduction cover) where the clutch shaft comes out.
Reference: 3810006
Brand: Piaggio
Seal for the rear wheel bearing. Size: 22x47x7mm. Fits all Piaggio & Gilera 125cc to 180cc engine blocks. Made by Corteco from high quality VITON rubber.
Reference: 3820007
Brand: Piaggio
Seal for the rear wheel bearing. Size: 30x47x6mm. Fits all Piaggio & Gilera 50cc to 180cc engine blocks. Made by Corteco from high quality VITON rubber.
Reference: 880A141SR
Brand: Piaggio
Seal set Gilera Runner 125-180 2T 1998-2002
Reference: 289554
Brand: Piaggio
Ring that sits behind the locking clip for your water pump / oil pump. Sits in many Piaggio 2-stroke engines such as Gilera Runner 50cc, 125cc and 180cc but also in a Piaggio Zip 2-stroke.
Reference: 434885
Brand: Piaggio
Special shim rings to shim your v-belt. On a 125-180cc the V-belt does not lie nicely at the bottom of the vario. This is a negative effect (just accelerate on a moped or car in 2nd gear). With these special shim rings of 1mm thick you can shim the V-belt nicely.
Reference: 668004
Brand: Piaggio
This original shock absorber (part number 668004) is specially designed for the Piaggio Zip 2000. It provides optimum damping and spring formation, and contributes to a comfortable and safe driving experience.
Reference: 174874
Brand: Piaggio
The Front Fork Shock Absorber Rubber 174874 for Piaggio & Gilera scooters is an essential component for a comfortable and safe riding experience. This rubber absorbs vibrations and shocks from the front fork, allowing you to experience a smooth ride and optimal damping.
Reference: 560619
Brand: Piaggio
The Original Side Stand Bolt 560619 for Piaggio & Gilera Runner scooters is an essential part for a stable and safe parking position of your scooter. This bolt provides a secure attachment of the side stand to the frame of the scooter.
Reference: 295789
Brand: Piaggio
The Original Side Stand Spring DIK 295789 for Piaggio & Gilera Runner scooters is a specially designed spring that provides extra strength and stability when parking. This thicker spring is ideal for scooters that require heavier loads or extra protection.
Reference: 295788
Brand: Piaggio
The Original Side Stand Spring 295788 for Piaggio & Gilera Runner scooters is an essential part for stable parking and smooth operation of the side stand. This spring ensures that the side stand extends and retracts smoothly, keeping your scooter firmly in place when parked.
Reference: AP8206915
Brand: Piaggio
The most commonly used spark plug for Piaggio 125cc - 180cc. Works well on standard and tuned engines. Looking for an even better spark plug? We also have the Iridium BR9EIX
Reference: JD-NGKBR9ES
Brand: Piaggio
The most commonly used spark plug for Piaggio 125cc - 180cc for Toronda, DDL and HT inner heads. Works well on standard and tuned engines. Looking for an even better spark plug? We also have the Iridium CR9EIX
