There are 762 products.
Reference: NGK CR4 racing rood
Brand: WBTuning
Waterproof spark plug cap from NGK.
Reference: WB-I00213
Brand: WBTuning
WB Inlet set to mount a V-force 4 diaphragm on your Piaggio 125-180cc engine block. Advantage to this intake is that you do not need to edit the crankcases. Plug & Play. Attention! This intake set is only for big boys! Here are the advantages: You do not need to edit your crankcases to mount a V-FORCE. More compact and smaller than other large...
Reference: 118337
Brand: MALOSSI
Fits the MALOSSI 172cc water-cooled cylinders.
Reference: 494705
Brand: Piaggio
Original Piaggio gasket set fitting water-cooled Piaggio & Gilera 125cc - 180cc 2 Stroke scooters. This set has 3 different thicknesses of foot gaskets (0.4, 0.6 and 0.8mm) for perfect squish adjustment.
Reference: 576718
Brand: Piaggio
Lock for Gilera Runner for ignition and buddy with 2 keys
Reference: 2599099
Brand: BGM
Nozzle set for PWK carburetors. For o.a. the Polini PWK 28mm and the Keihin Air Striker carburetors.
Reference: 002440
Brand: Piaggio
Subframe nut for o.a. Gilera Runner 125-180cc 2t subframe but also for Piaggio Zip. This nut is also suitable for the Farotube subframeandother 50cc Piaggio subframes.
Reference: PI436346
Brand: SIP
Air intake cap for on the crankcase cover. Developed by SIP in high quality!
Reference: 121519
Brand: WBTuning
Inner cable 2.00 m / Outer cable 1.65. Fine throttle cable for when you no longer use an oil pump.
Reference: TRND.030212
Brand: Toronda
Special shim that can be mounted between the exhaust and the bend to allow tension-free mounting of the exhaust with brace.
Reference: SC-40419000
Brand: Piaggio
For Polini PWK 28mm to 34mm | Keihin 33mm to 38mm Ø 32-50mm steel
Reference: WBT-00016
Brand: Piaggio
All bearings and seals for a Gilera Runner with a M07 engine block. Note only for single bearings and if you have 180cc gears mounted in your M07 block then you will need the M08 rebuild kit.
Reference: 6117009
Brand: MALOSSI
Malossi V-Belt Kevlar X-Belt, Width top of string: 22MM, Thickness of string: 10.5MM Circumference: 830MM, Angle (degrees): 28 Original Malossi SKU: 6117009
Reference: 3810006
Brand: Piaggio
Seal for the rear wheel bearing. Size: 22x47x7mm. Fits all Piaggio & Gilera 125cc to 180cc engine blocks. Made by Corteco from high quality VITON rubber.
Reference: 7115508
Brand: MALOSSI
Malossi has a complete line of special aluminum radiators for the Piaggio ZIP SP. Malossi MHR Team radiators are designed with an extra large surface area and are able to provide excellent cooling even in the toughest conditions. Also definitely handy if you are converting a Piaggio Zip to 125cc - 180cc (see photo 2,3 and 4). MHR Team radiators are...
Reference: 431205
Brand: Piaggio
This is the bushing through which the kickstarter shaft runs. Over the years, this bushing can wear out, making your kickstarter run stiffly or make kicking feel uncomfortable. Replacing this bushing will make your kickstarter feel like new again. Note that you have to press it in with a press. This is an original PIAGGIO part in first class quality.
Reference: 7675121
Brand: Moto Tassinari
The V-Force 4 is the big daddy among diaphragms. Unfortunately, you don't just mount these on a Piaggio engine block. You need an adapter. This can be ordered separately.
Reference: 121690051
Brand: RMS
5 meters of transparent gasoline hose from RMS in size 6x9mm.
Reference: TRND.030202R
Brand: Toronda
Reinforcement brace/torque for Piaggio & Gilera engine blocks 125-180cc. This brace fits without any modifications to your crankcase. The Piaggio crankcases are known to want to crack. Especially if you often ride on your rear wheel. With this brace, your crankcase will be strengthened and there will be less torsion on the crankcase, which reduces the...
Reference: 289262
Brand: Piaggio
Large gear for oil pump for LC Piaggio 125-180cc engine blocks.
