There are 812 products.
Reference: 354554
Brand: MALOSSI
Fits the air-cooled & water-cooled (AC & LC) Malossi 172cc Cylinder.
Reference: 4876390002
Brand: MALOSSI
Fits the water-cooled original Gilera Runner 180cc cylinder. Size A (or called Cat 2) is the standard size piston.
Reference: 4876390003
Brand: MALOSSI
Fits the water-cooled original Gilera Runner 180cc cylinder. Size B (or called Cat 3) is the 1st oversize piston.
Reference: 4876390004
Brand: MALOSSI
Fits the water-cooled original Gilera Runner 180cc cylinder. Size C (or called Cat 4) is the 2nd oversize piston.
Reference: 7115508
Brand: MALOSSI
Malossi has a complete line of special aluminum radiators for the Piaggio ZIP SP. Malossi MHR Team radiators are designed with an extra large surface area and are able to provide excellent cooling even in the toughest conditions. Also definitely handy if you are converting a Piaggio Zip to 125cc - 180cc (see photo 2,3 and 4). MHR Team radiators are...
Reference: 7115506
Brand: MALOSSI
Malossi has a complete line of special aluminum radiators for the Piaggio ZIP SP. Malossi MHR Team radiators are designed with an extra large surface area and are able to provide excellent cooling even in the toughest conditions. Also definitely handy if you are converting a Piaggio Zip to 125cc - 180cc (see photo 2,3 and 4). MHR Team radiators are...
Reference: 875068
Brand: Piaggio
Original water pump from Piaggio capable of pumping 13 liters of water per minute. (780 liters per hour). This pump is of high quality and is made by Piaggio in Germany. To be used for racing scooters but also as an extra pump between your original cooling system for a better flow of your KVS. By installing an electric water pump your scooter will in most...
Reference: 5616363
Brand: MALOSSI
Malossi water pump that can pump 20 liters of water per minute. (This high quality pump is made by Malossi in Italy. To be used for racing scooters but also as an extra pump between your original cooling system for a better flow of your KVS. By installing an electric water pump your scooter will in most cases cool 30-40% better (especially at low...
Reference: P170.2050
Brand: Piaggio
Water pump from Polini capable of pumping 20 liters of water per minute. (1200 liters per hour). The nice thing about this water pump is that it can pump a lot of water but also that the connection of the hoses are very easy to connect b.v. under your hood set. This pump is of high quality and made by Polini in Italy. To use for racing scooters but also...
Reference: 827396
Brand: Toronda
Locking clip for primary gear shaft bearing for Gilera Runner 125 and 180cc double bearing engine blocks. Made of spring steel with black oxide coating for protection against rust. No longer supplied by Piaggio, replacement item for Piaggio 827396 OEM.
Reference: 271779
Brand: Piaggio
Subframe bolt for o.a. Gilera Runner 125-180cc 2t subframe. In the subframe there are 2 bolts a short and long bolt (205mm and 215mm). This is the 215mm variant. This bolt is also suitable for the Farotube subframeandother 50cc Piaggio subframes.
Reference: 271807
Brand: Piaggio
Subframe bolt for o.a. Gilera Runner 125-180cc 2t subframe. In the subframe there are 2 bolts a short and long bolt (205mm and 215mm). This is the 205mm variant.
Reference: 002440
Brand: Piaggio
Subframe nut for o.a. Gilera Runner 125-180cc 2t subframe but also for Piaggio Zip. This nut is also suitable for the Farotube subframeandother 50cc Piaggio subframes.
Reference: 03617
Brand: HT Parts
This variator is made of 7075 aluminum resulting in better performance and longer life. This variator allows the drive belt to sit further into the variator, resulting in more torque and higher top speed. Compared to other variators, this one guarantees you long lasting results and mileage. This variator comes with 1x back plate, 3x side bushings and 1x...
Reference: 273099
Brand: Piaggio
Thick washer that sits behind the nut on the rear wheel of many Piaggio & Gilera models. Very important to mount this because otherwise the rear wheel will not turn properly + this ring is also needed together with a brace because of the shim space.
Reference: 563728
Brand: Piaggio
Original nut for the rear wheel of many Piaggio and Gilera models.
Reference: 1C004746
Brand: Piaggio
Lock cap to secure the rear wheel so it cannot come loose if the nut vibrates loose.
Reference: 121850340
Brand: Piaggio
Complete set for the rear wheel. Nut, locking cap and cotter pin.
Reference: 271451
Brand: Piaggio
Cable clamp used on many Piaggio & Gilera models. Can be used for multiple purposes. B.v. to clamp a brake line, ignition cables or to neatly hide hoses and plugs from a carburetor.
Reference: 564497
Brand: Piaggio
Plate rear brake cable to clamp the drum brake cable to your crankcase.
